TN83B8251
B8251T83E8HR-2T-N-EDA
- 2S AMD EPYC Milan-X / Milan / Rome CPU
- 16 DIMM slots w/ DDR4 3200 memory support
- 8 3.5" SATA/NVMe U.2 hot-swap , tool-less drive bays
- 4 FH/10.5"L double wide PCIe 4.0 x16 + 2 HH/HL PCIe 4.0 x16 slots
- (1+1) RPSU
| SKU |
|---|
| B8251T83E8HR-2T-N* |
| B8251T83E8HR-2T-N-EDA* |
Specifications
Air Cooling
- Fan
- (5) 8cm fans
Storage SATA
- Connector
- (2) SATA-DOM / (8) SATA from (2) Slim SAS (8 ports)
- Controller
- Direct from AMD EPYC CPU
- Speed
- 6Gb/s
- RAID
- N/A
Storage NVMe
- Connector (U.2)
- (4) SFF-8654 for (8) front NVMe
I/O Ports
- USB
- (1) USB3.1 Gen.1 port (Type-A) / (2) USB3.1 Gen.1 ports (via Cable) / (2) USB3.1 Gen.1 ports (@ rear)
- COM
- (1) header ( COM1 )
- VGA
- (1) D-Sub 15-pin port
- RJ-45
- (2) 10 GbE ports + (1) dedicated GbE for IPMI
- SATA
- (8) SATA from (2) Slim SAS connectors / (2) SATA-DOM connectors
System
- Motherboard Notification
- # The motherboard not sold separately
- Form Factor
- 2U Rackmount
- Dimension (D x W x H)
- 32.71" x 17.25" x 3.43" (831 x 438.4 x 87mm)
- Chassis Model
- TN83
- Motherboard Name
- S8251GM2NE-2T #
- Gross Weight
- 33.1 kg (73 lbs)
- Net weight
- 20.3 kg (44.8 lbs)
Processor
- #Notification
- 240W CPUs are supported with certain condition. Please contact Tyan Technical Support before purchasing
- Q'ty / Socket Type
- (2) AMD Socket SP3
- Supported CPU Series
- (2) AMD EPYC™ 7002/7003 (with AMD 3D V-Cache™ Technology) Series Processors
- Thermal Design Power Wattage
- Max up to 240W* (cTDP)
Memory
- Supported DIMM Qty
- (8)+(8) DIMM slots
- DIMM Type / Speed
- DDR4 ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS 3200
- Capacity
- Up to 2,048GB RDIMM / 4,096GB LRDIMM 3DS
- Memory channel
- 8 Channels per CPU
- Memory voltage
- 1.2V
Storage
- Q'ty / Type
- (8) 3.5" Hot-swap HDD/SSDs
- Front Drive Bay Interface
- (8) SATA 6Gb/s / NVMe
- Front Drive Backplane Support
- SAS 12Gb/s /SATA 6Gb/s /NVMe
- Notification
- The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact MiTAC technical support if a discrete SAS HBA/RAID adapter is required.
PCIe Expansion Slots
- Pre-installed TYAN Riser Card (PCIe Gen.4)
- (1) <a href=/Tyan/risercard_M8251_M8251T83-L32T-2F_EN~Spec>M8251T83-L32T-2F</a> riser card for (2) FH/FL PCIe Gen.4 x16 / (1) M8251T83-R32T-2F riser card for (2) FH/FL PCIe Gen.4 x16 / (1) M8251T83-LR32T-2L riser card for (1) HH/HL PCIe Gen.4 x16 (right) +(1) HH/HL PCIe Gen.4 x16 (left) slots
- Physical Dimension Abbreviation
- FH/FL (Full-height / Full-length): 4.4" x 12.3" (111.2 x 312mm)
Front Panel
- I/O Ports
- (2) USB 3.1 Gen.1 ports
- Buttons
- (1) UID / (1) PWR w/ LED / (1) RST
- LEDs
- (1) HDD / (1) UID / (2) LAN / (1) System Event
Networking
- Q'ty / Port
- (2) 10GbE ports + (1) GbE dedicated for IPMI
- Controller
- Intel X550-AT2
- PHY
- Realtek RTL8211E
TPM (Optional)
- TPM Support
- Please refer to our TPM supported list.
Power Supply
- Type
- CRPS
- Input Range
- AC 200-240V/12.6A / AC 100-127V/14A
- Frequency
- 47/63 Hz
- Output Watts
- 1,200 Watts (100-127Vac input) / 2,200 Watts (200-240Vac input)
- Efficiency
- PFC / 80 plus Platinum
- Redundancy
- 1+1
Graphic
- Connector type
- D-Sub 15-pin
- Resolution
- Up to 1920x1200
- Chipset
- Aspeed AST2500
System Monitoring
- Others
- Watchdog timer support
- Chipset
- Aspeed AST2500
- Temperature
- Monitors temperature for CPU & memory & system environment
- Voltage
- Monitors voltage for CPU, memory, chipset & power supply
- LED
- Over temperature warning indicator / Fan & PSU fail LED indicator
BIOS
- Brand / ROM size
- AMI / 32MB
- Feature
- Hardware Monitor / FAN speed control automatic / Boot from USB device/PXE via LAN/Storage / Console Redirection / SMBIOS 3.0/PnP/Wake on LAN / ACPI 6.1 / ACPI sleeping states S0, S5
Server Management
- AST2500 iKVM Feature
- 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
- AST2500 IPMI Feature
- IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface
- Chipset
- Aspeed AST2500
Operating Environment
- Operating Temp.
- 10° C ~ 35° C (50° F~ 95° F)
- Non-operating Temp.
- - 40° C ~ 70° C (-40° F ~ 158° F)
- In/Non-operating Humidity
- 90%, non-condensing at 35° C
Regulation
- FCC (SDoC)
- Class A
- CE (DoC)
- Class A
- RCM
- Yes
- CB/LVD
- Yes
- VCCI
- Yes
- BSMI
- Yes
OS Compatibility
- OS supported list
- Please refer to our compatibility support lists
RoHS
- RoHS 6/6 Compliant
- Yes
Package Contains
- Barebone
- (1) TN83-B8251 Barebone
- Manual
- (1) Quick Installation Guide
Recommended Products
Stay Connected
Get industry insights, news, and event highlights.